- Mechanical Key Cutting Machine
- With built-in lithium battery
- Standard equipped multi-function clamp, support Sided, Track & Dimple keys
- Easy to Carry
- 1-year warranty
Xhorse Dolphin XP-007 Mechanical Key Cutting Machine
Xhrose Dolphin XP-007 Description:
Xhrose Dolphin XP-007 is the latest portable manual key cutting machine with a double-side multi-function clamp and a built-in battery inside. It is powerful and compact.
Dolphin XP-007 Function Characteristics:
1. Professional Design
Attractive appearance, small and portable, ergonomic control design
2. Precision Production
All-aluminum body structure, Manufactured by Germany-made DMG CNC machine
3. High-Efficiency Cutting
120W DC brushless motor, designed 2 switches for adjustment speed, high-efficiency cutting, support multiple materials of the key blank.
4. Precision Cutting
With the micro-adjust probe, Spring preloading type fine-tuning structure, ensure cutting accuracy；With this structure it can position the original key in advance, in case the spring vibrating caused cutting error, good for accuracy
5. Built-in Lithium Battery
The optimized lithium battery of well-known brand, stable and reliable, support cutting under no power conditions
Standard equipped multifunction clamp, support Sided, Track, Dimple and Tibbe keys
7. Technical service
One year warranty, free technical support, online service to provide remote control support
Dolphin XP-007 Support Car Key Type:
XP-007 Main Parts With Function Description:
1. Auxiliary handle
2. Main handle
1) Move the handle forward or backward to adjust the height of the cutter and probe. The cutter and probe will go back to its initial height when dropping the handle.
2) Move the handle to set the height of the cutter and probe and lock them by rotating the handle clockwise.
Power switch and speed selection, include OFF, ON, 1, 2 switch position.
1) Power is off when switching to 'OFF'.
2) Power is on when switching to 'ON', the LED light is on and the machine is on standby.
3) The motor is at a low speed of 8000 rpm when switching to '1'
4) The motor is at a high speed of 10000 rpm when switching to '2'.
4. Indicative light for height leveling
1) For adjusting height indicator light.
Only left side light
on, probe height higher than the cutter. Move the micro-adjuster knob clockwise to let probe move down.
Only right side light
on, cutter height higher than the probe. Move the micro-adjuster knob counter-clockwise to let probe move up.
Only probe and cutter at the same height, both light on.
2) Battery status
Full lights on means battery full charge
Only one green light on, means battery low, please recharge on time.
Only one red light on, means battery badly low, please recharge asap
3) For charging setting
Charging setting is red means battery low, need to recharge or charging
The charging setting is green means battery full. You can unplug the power cord.
If the machine without Li-ion battery pack, plug in the power cord, the battery indicator is green and the charging indicator lights up in green.
Micro-adjuster includes micro-adjuster knob and prepositioning switch.
1) Micro-adjuster knob allows precise adjustment to the height of probe, Turn the knob clockwise to move down the probe and counter-clockwise to move up the probe.
2) Prepositioning switch mainly supports setting position in advance, mainly for cutting dimple keys more accuracy, When the prepositioning switch is at 'UP', setting position function disabled, prepositioning switch is at 'Down', setting position function enabled, the probe height is lower than the cutter because of inside spring but it can bounce back to a level same to the cutter, when cutting dimple keys, the probe will be detected the original key center point in advance, cutting keys with more accuracy.
6. Locking knob
1) When the right locking knob is tightened, the working platform is restricted to move at a smaller distance, it will be easy to control the cutting key width.
2) When both locking knobs are tightened, the working platform can only move along Y-axis but not along X-axis, when cutting dimple keys, in case of the platform horizontal shaking because of the cutting.
Probe micro-adjuster function for prepositioning function only switch at 'UP' position, or may affect on cutting accuracy
7. Supporting arm
1) The supporting arm with a damping effect, can move up and down.
2) When the machine is in use, move the supporting arm to a proper position where you feel good.
When moving the machine, the supporting arm can be moved forward limited to prevent the clamp from shifting.
Xhorse Dolphin XP-007 Specifications:
Input voltage: 12-24V
Battery capacity: 65.52Wh
Main axis rotation speed: Maximum: 13000RPM; Gearl: 8000RPM; Gear2: 10000RPM
Motor Torque: Gearl: 0.12 N.M; Gear2: 0.16N.M
Main axis displacement: 25MM
Operating platform displacement: X axis: 36mm Y axis: 50mm
Working temperature: 0-50°C
Working Humidity: 10-90%
Machine dimension: 270*168*355mm
Package dimension: 380*340*360mm
Net weight: 11.5kg
Gross weight: 14kg
Xhorse Dolphin XP-007 VS Condor XC-002:
Xhorse Dolphin XP-007 Package list:
||Built-in Lithium Battery, Optimized lithium battery of well-known brand, stable and reliable
||Standard equipped multi-function clamp, support Sided, Track & Dimple keys
||Four in one clamp
||120W DC brushless motor, designed 2 switches for adjustment speed
||max speed 10000RPM, Supports setting speed by manual
1pc x key cutting machine unit
1pc x Power adapter
1pc x power cord of US standard
1pc x Brush
1pc x 2.5mm Cutter
1pc x 1.5mm Cutter
1pc x Double-sided robe
3pcs x Hexagon barerench
1pc x Key piece
2pcs x Align stopper
1pc x User manual
2pcs x Shim
1pc x Product quality certificate
Contact us to get a good price:
+86 15696171957Products that may interest you: