How to test the battery for Dolphin XP-005/Dolphin XP-005L
Matched product:
Xhorse Battery Replacement for Dolphin XP005/XP005L Key Cutting Machine
£192
- Item No. HKSO646
- Free Shipping
This is Xhorse replacement battery for the Dolphin XP-005 and XP-005L automatic key cutting machine.
Warning: Please recharge it for an hour or more before testing the battery.
Step 1. Use a 2mm hex wrench to remove the screws that secure the handle covers on each side of the machine.
Step 2. Use a 2.5mm hex wrench to remove the screws located on the bottom of the case, then remove the bottom plate.
Step 3. Remove the screws holding the battery and disconnect 3 connectors to remove the battery.
Tips: It's best to take a picture before unplugging the cable, so you can remember how to plug it back in.
Step 4. Short the two pins of the starter switch and use a multimeter to test the two pins of the output terminal. If there is no 24 V voltage output, the battery does not store electricity and must be replaced.
