Xhorse VVDI2 Key Programmer BMW FEM/BDC Function Authorization Service (without mini condor key cutting machine)

In Stock. History 35 sold. Item No. SV86-S1D

Buy Now: £176.00
Black Friday promo, 24-30 Nov.

UK/Czech Ship, No Tax
US Ship, No Tax

Email: service@xhorse.co.uk
Skype: service@xhorse.co.uk
WhatsApp: +86 15696171957
Shipping:
Free Shipping Express Shipping ServiceEstimated delivery time: 5-7 working days.See details »
Returns:
Return for refund within 7 days,buyer pays return shipping. Read details »

Product Description

VVDI2 Key Programmer BMW FEM/BDC Function Authorization Service, the price is 168GBP,open it online within 24 hours at working time.

Xhorse VVDI2 Key Programmer BMW FEM/BDC Function Authorization Service


If you have mini condor key cutting machine, please order SV86-SD
When finish order, please kindly give us your VVDI2 SN number, this is really important.
 

VVDI2 BMW FEM/BDC Function:
VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)
1. support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2. support reset FEM/BDC KM(cluster require reset manually)
3. support erase key(after erasing the key position become blank position)
4. support backup coding
5. support restore coding

Notes:
1. backup coding and restore coding can direct operation generally.
2. add keys, reset KM, erase key must programming FEM/BDC system first
3. in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use the "BMW E-sys software" program FEM/BDC system.
then programming FEM/BDC system with VVDI2-BMW
4. when an operation on the 'programming FEM/BDC system'interface, please don't close this software window until all procedures completed.
5. programming FEM/BDC system, require soldering and get EEPROM.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6. programming FEM/BDC system, must restore the original EEPROM, restore coding. if cannot restore coding or after restore coding assemble FEM/BDC module back to the car, but with the problem(such as the remote control cannot start the car or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7. if connect power to FEM/BDC module, but the relay keeps ringing, please contact technical support for help.usually operation on FEM/BDC should be ok, just need to programming.



Contact us to get a good price:

Email: service@xhorse.co.uk
Skype: service@xhorse.co.uk
WhatsApp: +86 15696171957

Products that may interest you:

xhorse tools on xhorse.co.uk