(5PCS/lot) 2022 Xhorse XKGHG1EN Masker Garage Remote Supports Code Deleting/ Remote Cloning/ Frequency Setting/ Data Recovery

Product Description

2022 Xhorse XKGHG1EN Masker Garage Remote

Xhorse Masker Garage Remote Highlights:
 
1. Switch frequency manually, over 20 frequencies available.
2. Switch frequency via devices, including KEY TOOL PLUS, KEY TOOL MAX PRO, KEY TOOL MAX, and MINI KEY TOOL.
3. Support fixed code cloning
4. PT224X, PT226X, EV1527, LX918, DOOYA, HT6P20, VD5026, AX5326, HT12X, SHAPU, BISENT(T18/T19/T26)
5. Support HCS rolling code cloning of over 100 garage doors, electric gates, and two-wheeled electric vehicles.
6. Support data recovery function.


Xhorse Masker Garage Remote Functions:

1. Delete Code

How to check Delete Code Status?
Before cloning remote, we should check the garage remote status, to make sure remote in deleted code status.
1) Deleted code status: The LED will flash once then go out quickly when keep pressing any button of the garage remote.



2) Delete code operation:
① Press and hold "Up" & "Down" buttons at the same time, until LED light on. Keep pressing 2 buttons until the LED light off, then release the buttons;



② Press and hold  "Pause", until LED light on then off. Release the button, delete code successfully.



2. Remote cloning (remote clone from the original remote)

How to do Remote Cloning?
1) Preparation work
① Please confirm the garage remote has been in deleted code status. If not, please do above delete code operation first.
② Make sure the garage remote frequency is same as original remote, in case the remote cloning failed or even remote cloning successful, but the working distance is too short to work well.
2) Remote cloning operation
① Press and hold any one button of Xhorse Garage Remote, this remote will enter cloning mode, LED will flash once then off (keep pressing the button).
② Press and hold original remote one button (same button as step1). Put the original remote next to Xhorse garage remote. Once the LED light is on, which means current button cloning is successful.
③ Follow the above steps to clone remote all buttons one by one.



3. Set the frequency

How to do the frequency setting?
1) Enter set frequency mode:
Press and hold the "Lock" and "Pause" buttons at this time, remote LED light on, keep pressing two buttons until the remote LED light is off, then release the buttons.
2) Set frequency:
Press the "Up" button, Press once, LED flashes once. For different frequencies with different press times, please refer to the frequency reference table.
3) Double check frequency:
After the set frequency is successful, release all the buttons. Wait 5 seconds, the remote LED will flash, and the flashing times depend on the set frequency. (Please refer to frequency reference table).


4) Exit set frequency mode:
After the remote LED stops flashing, press the "Lock" and "Pause" buttons immediately, meanwhile the LED light is on, and keep pressing 2 buttons until the LED light is off. then release the button and set the frequency operation successfully.

4. Data recovery
5. Support remote generation for a variety of garage remote brands
Kirin 350
Kirin 433
Linma 433
Anfusheng
Aonuo
Ostar 433
APRIMATIC
Anphosphorus 350
Anphosphorus 433
AnlinD 433
Anlin 580
Alcano A 315
Alcano B 433
Boda B Regeneration
Bohai
Bujin
Baisheng T18 433
Baisheng T19 433
Changshun
Changyuan Regeneration
Chibao A Blue
Changfeng 433
CELINSA 433
Dort B
DEA
DOORHAN 433
DEMA 433
Dooya DOOYA 433
ETDOOR 433
EKA 433
ELKIABC 433
Fengye
Fubang
Ford
Fudi
Feiren
Gunde A GM
Guoweite
GBD
GAMEB
GAM 
Haizhu A
Hengfuwei
Hongrisheng
Hongrisheng A
Hoss A
Hoss 433
Hoss C/D
Hoss F-325
Hoss F330MG
Hoss F350MG
Hoss F-390 
Shenyang Haitong
Haitong
Haomai
Jisu
Jisu A
Jiahe
Juguang 315
Juguang A 433
Juguang B
Zaisheng
Gephos 350
Gephos 433
Jiuyi
Carson
Kaimenhong
Kema B
Kangma B
Kardin
KEY
Wright 680 regeneration
Wright red light regeneration
Wright green light regeneration
Ideal A Blue
LGUR 433
Mentor A
Mentor B
Master
Mentor
MOTORLINE
MHZ004 433
MHZ100N 433
ML-216H
Nanxiang regeneration
NICE SMILO
NICE.FL01/2/4
Pan'an A
PROTECO
PAT1 433
Qianshan Second Generation
Ruineng A
Ruineng B
ROGER
RCG12C433
Sprite 60 S66
Sprite S80
Senma
Shengda
Shengtai B
Suoge
Suogesuoma KS680
Suoma A
Suoma B
Smart
Siwei A Red Light
General A 
Tianhong A
Tianhong B
Tianhong C
Tianshan
Waikewei 433
Weston Regency
Xisaide 600
Xisaide 800
Xisaide B
Xisaide C
Sharp 315
Sharp 433
Xiangtian 350
Xiangtian 433
Yijie
Yide
Zhongtian A
Zhongtian B600

Contact us to get a good price:

Email: Sales01@Xhorse.co.uk
Skype: service@xhorse.co.uk
WhatsApp: +86 17308368390